•The MW-3-HS Magnetic One Finger Reversible Ratchet Knob™ is a cutting-edge tool engineered to streamline tasks both in the workshop and on the job site. The MW-2-HS is designed for smaller head ratchets. For larger head “high-torque” models, the MW-1 may be a better choice.
•Made specifically for Milwaukee high-speed ratchets, the MW-2-HS was developed after we had a few users write in with an oscillation-related issue when using the MW-2 knob with high-speed ratchets. This oscillation caused the knob to actuate the directional change mechanism, unintentionally switching the ratchet from one direction to another.
•The addition of the o-rings provides two distinct advantages:
•1: The o-rings act as a damper between the knob and the head of the ratchet, eliminating the oscillation mentioned above, and providing seamless use with high-speed ratchets.
•2: Working alongside two N52 neodymium magnets, the o-rings provide a friction fit in the head meaning the MW-2-HS is rock solid when you attach it to your ratchet.
•Compatible with the following Milwaukee Part Numbers: US: 2556-20, 2559-20, 2566-20, 2567-20, 2568-20, 2569-20, EU: FHIR38, FHIR14, FHIR38LR, FHIR14LR
•O-ring Friction Fit: The addition of two carefully sized O-rings provides a damping action and friction fit in the head of the ratchet, making this the most solidly secured ratchet knob there is
•Magnetic Feature: The magnetic design features two N52 neodymium magnets and securely holds the knob to the ratchet, enabling you to work with enhanced speed and precision.
•One-Finger Operation: The direction of the Ratchet Knob can be reversed effortlessly using just one finger, promoting efficiency.
•Glove friendly: Improves the user's control over the directional switch, allowing for much effective operation when wearing gloves.
•You don't need any additional tools, just slide the MW-2-HS onto your existing ratchet and that's it! To ensure solid contact, please make sure your ratchet head is clear any dirt or debris.
•Care: Your MW-2-HS will come with silicone lubricant on the O-rings. If you experience any friction or resistance from the O-rings, add a drop of oil or grease to encourage ease of rotation of the knob in the head of the ratchet. If the O-rings break or increased oscillation occurs, you can replace the O-rings using one of our O-ring service kits, that include the required components.
•Get your tasks done faster and with greater efficiency by using the MW-2-HS Magnetic One Finger Reversible Ratchet Knob!
•The HS adaptation of the Ratchet Knob is a significant improvement over the standard MW-2. We have found, however, that users with XC or High-output batteries may still experience minor directional switching with fully charged batteries and heavy anvil load
|